Perle IOLAN + Rack - Remote Site Devices

52
IOLAN
+
- User and Administration Guide
\t phone# (sends the telephone number
field).
\d send the modem’s dial command
\\ escapes to ‘\’.
\b send a break.
Dial-out PAP
Authentication
If a dial-out script is not used but a username and password
are defined, IOLAN+ will send a PAP packet after
establishing a PPP link and use the username and password
defined for the remote site.
6.5 Remote Site
Devices
This screen is used to define/setup the modem device. There
are a lot of similarities between this screen and the UUCP
devices file under Unix. It is possible to assign several ports
the same device name, and the dialer daemon will
automatically use the first available port. It is also possible to
have these ports do ‘double-duty’ and serve as regular dial-in
ports for dumb terminal access, SLIP or PPP in addition to the
dial-out capability.
** Administrator ** REMOTE SITE DEVICES SCREEN REMOTE-ADMIN
Type [modem1 ]
IP Addresses
Src Addr [206.131.227.5 ]
Dst Addr [206.189.134.7 ]
Modem
Config [at ]
Dial Comm [atdt ]
Hang Up [+++ath0 ]
PPP Configuration Dialer Configuration
Restart timer [3 ] Dial Timeout [40]
Max Retries [5 ] Dial Retries [2 ]
Inactivity [0 ]
________________________________________________________________________________
Figure 25: Remote Site Devices Screen.