104
IOLAN
+
- User and Administration Guide
9.14 Server
Configuration
Menu
This menu allows the user to define all of the main IOLAN+
system parameters.
** Administrator ** SERVER CONFIGURATION REMOTE-ADMIN
Name [IOLAN+ ] Debug mode [0 ]
IP address [204.17.209.8 ]
Subnet mask [ ]
Ethernet address [00:80:d4:00:9e:a1] Ethernet interface [AUTO ]
Language [English ]
Identification [ ]
Lock [Disabled]
Password limit [5 ]
CR to initiate [Yes ]
SNAP encoding [Disabled]
Boot host [204.17.209.1 ] Boot diagnostics [Enabled ]
Boot file [ ]
Init file [ ]
MOTD file [ ]
Domain name [perle.com ]
Name server [astro ] NS Port [53 ]
WINS server [fred ]
________________________________________________________________________________
Figure 48: Server Configuration menu.
The menu as displayed can be divided into four logical
sections: identification fields, general admin, downloading
and domain naming.
Identification
Fields
Name
This field determines the name of IOLAN+ and
is displayed in the bottom right hand corner of
the menus.
IP address
This field holds the IP address of IOLAN+. If the
IP address of IOLAN+ is altered then the unit
must be rebooted to permanently save changes.
Subnet mask
This field allows the administrator to define a
mask that IOLAN+ uses to mask out packets
from other networks using the same ethernet.
To Next Page
Loading...
