Perlesmith PSLFK1-24 - User Manual

To Next Page

3-1

TV Bracket

Arm Extensions

Wall Extension A

Wall Extension B

Front Support

Stud

Finder

Tape

measure

Pencil Level

Drill

1/2 in.

(12.7 mm)

7/32 in.

(5.5 mm)

Wood Drill

Tools Needed

Screw

driver

Hammer

(included

inside the box)

WARNING! SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN RESULT FROM IMPROPER

INSTALLATION OR ASSEMBLY. READ THE FOLLOWING WARNINGS BEFORE BEGINNING.

If you do not understand the instructions or have any concerns or questions, please contact a qualiﬁed

installer.

Do not install or assemble if the product or hardware is damaged or missing. Not all parts and hardware

included must be used. If you require replacement parts, contact customer service at

supportus@perlesmith.com.

This product has been designed for use on a vertical wall constructed of wood studs. Wood studs being

deﬁned as a wall consisting of a minimum of 2” x 4” studs with a maximum of 24” stud spacing with a

maximum of 1/2” of wall covering (drywall, lath, plaster).For custom installations please contact a

qualiﬁed installer. For safe installation, the wall you are mounting to must support 4 times the weight of

the total load. If not, the surface must be reinforced to meet this standard. The installer is responsible for

verifying that the wall structure/surface will safely support the total load.

This product may contain moving parts. Use with caution.

DO NOT EXCEED THE MAXIMUM WEIGHT CAPACITY FOR THIS PRODUCT.

Please check www.perlesmith.com for more products and company information.

CAUTION!

MAXIMUM WEIGHT CAPACITY

WARNING!

WEIGHT CAPACITY

132 lbs

(60kgs)

Hardware Included

Hardware (Wall)

5/16 x 2½ in

Lag Bolts

Washers

Ø8mm

Hardware

Nuts

Washers

Ø8mm

TV Screws / Washers

Philips Screws

M6 x 15mm

M6 x 30mm

Philips Screws

M4 x 12mm

M4 x 30mm

Washers

Ø6mm

M4-5-6

Spacers

L10mm

x4x4

Philips Screws

M8 x 15mm

M8 x 45mm

x4 x8 x4

M-EM-A M-B M-C M-D

M-F M-G

M-H

Spacers

L5mm

M-I

M-E

M-H

M-CM-A

M-F

M-H

M-I

M-G

M-D

M-B

STEP 1

Measure the distance between the

holes located at the back of your TV

(these measures may form the shape of

a square, or a rectangle) and check

that these taken measures are within

the VESA(*) range for this wall mount.

(*) VESA: International standard

established by the TV manufacturers

used to determine if LCD / LED TVs

are compatible with wall mounts.

75 mm ≈ 2 7/8 in

100 mm ≈ 4 in

200 mm ≈ 7 7/8 in

300 mm ≈ 11 3/4 in

400 mm ≈ 15 3/4 in

600 mm ≈ 23 5/8 in

STEP 2 Install TV bracket

Check the VESA pattern of your TV

400mm (15 3/4 in)

Max 600mm（23 5/8 in）

Max

STEP 2A

Flat back TV (Universal monitor plate)

STEP 2B

Connect TV Brackets to back of TV

Connect TV brackets to back of TV

STEP 3

Wall Plate Install

Use a stud ﬁnder (not included) to locate

wood studs. Mark the edge and center

locations.

Arm and

Wall Plate

USE WITH PRODUCTS LARGER THAN THE MAXIMUM WEIGHT AND SIZE MAY RESULT IN INSTABILITY

CAUSING POSSIBLE INJURY. USER MUST REMOVE TELEVISION OR OBJECT OFF THE BRACKET BEFORE

ADJUSTING. NOT SUITABLE FOR A TV THAT SURPASSES THE TELEVISION MAXIMUM WEIGHT CAPACITY

AND RECOMMENDED DIAGONAL MEASURED TV SIZE!

1 2

3 4 5

Check TV screws

Please select the proper screw length for your TV

by hand tightening to check your plat panel

thread depth.

Correct Correct

Too Long

Too Short

Round back TV (Universal monitor plate)

16in to 24in

When attaching brackets to the ﬂat screen,

be careful not to over tighten screws and be

sure that screws do not bottom out in the

mounting holes.

（product)

Allen

Wrench

V5.0

LARGE FULL-MOTION TV WALL MOUNT

PSLFK1-24

Thank you for choosing our product! We strive to provide the best quality and

services for our customers. Would you kindly share your experience on Amazon if

you are satisﬁed? Should you have any issues, please don't hesitate to contact us.

Telephone：800-5566-806 Mon-Fri 10am - 6pm (PST) (USA)

Email：supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/JP/AU)

Other manuals for Perlesmith PSLFK1-24

Installation Instructions12 pages

Need help?

Do you have a question about the Perlesmith PSLFK1-24 and is the answer not in the manual?

Summary

General Safety Warnings

Severe Injury and Property Damage Warning

Read warnings before installation to prevent severe injury or property damage.

Maximum Weight Capacity

Do not exceed the maximum weight capacity for the product to prevent instability.

Hardware and Tools Overview

Hardware Included

List of all hardware components provided for the TV wall mount installation.

Tools Needed

List of essential tools required for the successful installation of the TV wall mount.

VESA Pattern Check

Check the VESA pattern of your TV

Measure TV hole distances to confirm compatibility with the VESA standard.

TV Bracket Installation

Install TV bracket

Select correct screws and attach brackets to the TV's back panel.

Flat back TV (Universal monitor plate)

Connect TV brackets to the back of a TV with a flat mounting surface.

Round back TV (Universal monitor plate)

Connect TV brackets to the back of a TV with rounded mounting holes.

Wall Plate Installation

Wall Plate Install

Locate wall studs and securely fasten the wall plate to the wall.

Attach the Extensions to the wall plate

Add wall plate extensions, adjusting for different stud spacing requirements.

Mount wall plate using lag bolts

Securely fasten the wall plate to the wall studs using lag bolts and washers.

Arm Extension and TV Mounting

Install arm extensions then fasten it

Attach and secure the arm extensions to the installed wall plate.

Hang TV

Hang the TV, with attached brackets, onto the arm extensions.

Secure TV

Secure the TV to the arm extensions using the provided screws.

TV Adjustments

Tilt adjustment

Loosen tilt levers, adjust TV position, and tighten levers to secure tilt.

Level adjustment

Loosen screws, level the TV, and tighten screws to maintain level.

This document describes the PERLESMITH Large Full-Motion TV Wall Mount, model PSLFK1-24, designed to securely mount televisions to a vertical wall. The mount provides a full range of motion, allowing users to adjust the TV's position for optimal viewing.

Function Description

The PERLESMITH Large Full-Motion TV Wall Mount serves as a robust and versatile solution for mounting flat-panel televisions. Its primary function is to securely attach a TV to a wall, freeing up floor space and providing a clean, modern aesthetic. The "full-motion" aspect signifies its ability to extend, retract, swivel, and tilt the television, offering unparalleled flexibility in viewing angles. This makes it ideal for rooms with multiple viewing areas, or for situations where glare needs to be minimized at different times of the day. The mount is designed to accommodate a wide range of TV sizes and weights, provided they fall within the specified maximum weight capacity and VESA pattern compatibility.

The mounting system consists of several key components: a wall plate that attaches to the wall studs, arm extensions that connect to the wall plate, and TV brackets that attach to the back of the television. These components work in conjunction to create a stable and adjustable platform for the TV. The design incorporates mechanisms for fine-tuning the TV's position after installation, including tilt and level adjustments, ensuring a perfect setup.

Usage Features

The PERLESMITH Full-Motion TV Wall Mount offers a variety of features that enhance its usability and adaptability:

Full Range of Motion: The mount allows the TV to be extended away from the wall, retracted back towards it, swiveled left or right, and tilted up or down. This flexibility is crucial for optimizing viewing from various positions within a room, reducing glare, or accessing the back of the TV for cable management.
Tilt Adjustment: Users can easily adjust the vertical tilt of the TV to achieve the desired viewing angle. This feature is particularly useful for reducing glare from windows or lights, or for optimizing viewing from different heights, such as when watching from a bed or a high bar stool. The tilt levers can be loosened to adjust and then tightened to secure the TV in place.
Level Adjustment: After initial installation, the TV's horizontal level can be fine-tuned by up to +/-3 degrees. This ensures that the TV appears perfectly straight, even if the wall plate was not installed with absolute precision. This adjustment is made by loosening screws, leveling the TV, and then re-tightening the screws.
VESA Compatibility: The mount is designed to be compatible with a broad range of VESA patterns, which are standard measurements for mounting holes on the back of TVs. Users are instructed to measure the distance between the holes on their TV to ensure compatibility, accommodating both square and rectangular patterns.
Stud Mounting Options: The wall plate is designed for installation on vertical wood studs, with options for different stud spacing (16.5" to 18" and 18" to 24"). This ensures a secure attachment to the structural elements of the wall. The instructions provide clear guidance on how to mark and drill pilot holes for the lag bolts, ensuring a strong and safe installation.
Extension Capabilities: The wall plate includes extensions (Wall Extension A and B) that can be attached to accommodate wider stud spacing, providing flexibility for different wall constructions. These extensions can be moved by 0.6 inches on both sides if necessary.
Hardware Selection: The manual provides a comprehensive list of included hardware, including various sizes of TV screws (M4, M6, M8) and spacers, allowing users to select the appropriate hardware for their specific TV model. This ensures a secure fit without over-tightening or damaging the TV's threads.
Cable Management: While not explicitly detailed as a separate feature, the full-motion design inherently aids in cable management by allowing the TV to be pulled away from the wall, providing easier access to ports for connecting and organizing cables.
Easy Installation Steps: The manual breaks down the installation process into clear, sequential steps, from checking the TV's VESA pattern and selecting screws to mounting the wall plate, attaching arm extensions, hanging the TV, and making final adjustments. Each step is accompanied by diagrams for visual guidance.
Safety Warnings: The manual emphasizes safety throughout, warning against improper installation, exceeding weight capacity, and ensuring the wall can support the total load. It also advises caution with moving parts and recommends contacting a qualified installer if instructions are unclear.

Maintenance Features

While TV wall mounts generally require minimal ongoing maintenance, the PERLESMITH Full-Motion TV Wall Mount incorporates design elements that facilitate ease of use and long-term stability:

Durable Construction: The mount is constructed from robust materials, indicated by its substantial weight capacity (132 lbs / 60 kgs), suggesting a design intended for long-term durability and reliable performance without frequent need for repair or replacement.
Adjustable Components: The tilt and level adjustment mechanisms are designed for user access, allowing for periodic fine-tuning if the TV's position needs to be altered or re-calibrated over time. This means users can easily correct any slight shifts or preferences without needing professional assistance.
Secure Fastening: The use of lag bolts for wall attachment and various screws for securing TV brackets and arm extensions ensures a tight and stable connection. The instructions emphasize proper tightening to prevent loosening, which is key to maintaining the mount's integrity over time.
Accessibility for Adjustments: The design allows for adjustments to be made even after the TV is mounted. For instance, the tilt levers are accessible, and the level adjustment screws can be reached, making it convenient to modify the TV's orientation without dismounting it entirely.
Pre-assembled Screws: Some components come with pre-assembled screws (e.g., S4 on arm extensions, S1 and S2 for securing 02 and 03 onto 01), simplifying the assembly process and reducing the chance of losing small parts during installation. These screws are then reused, indicating a thoughtful design for maintenance and reassembly if needed.
Clear Instructions for Disassembly/Reassembly: Although not explicitly a "maintenance" feature, the detailed installation steps implicitly guide users on how to reverse the process if the mount needs to be removed or adjusted significantly, such as for moving the TV to a new location. The instructions for removing pre-assembled screws (S4) from the extensions and saving them for later use highlight this aspect.

In summary, the PERLESMITH Large Full-Motion TV Wall Mount is a user-friendly, robust, and highly adjustable solution for mounting televisions, designed with both initial installation and long-term viewing flexibility in mind.