Commercial Back Bar Installation & Operation Manual
Form No. Z2604
Rev A 04.20.23
9. Verify that the gasket is fully seated onto the door
frame when completed.
WINE RACK TRIM (OPTIONAL)
All wine reserve racks come with sleek stainless steel fronts.
Unnished solid hardwood fronts are optional and can
be removed and replaced with other wood to match your
cabinetry. See diagrams below for wine rack face details.
NOTE: The unnished faces should be nished and sealed. In many
cases, stains and/or nishes have odors that may be objectionable
in an enclosed area. Do not stain or nish wood faces while
installed on unit. To remove the front wood face from the wine
shelf, simply pull out the wine shelf and remove the fasteners,
nish as desired, and when completely dry, reinstall with fasteners.
Wine Rack Trim, 24” models
Wine Rack Trim, 15” models
10. After installation of the overlay panel is completed,
verify that the gasket is completely sealing around
the cabinet frame. If installing panels onto drawer
models (-6), repeat installation process for second
drawer face. Installation is now complete.
To Next Page
Loading...