Permobil ROHO Hybrid Select - Quick Setup Guide Manual

Ination valve
permobil.com
ROHO
®
Hybrid Select Cushion—Quick Setup Guide
Disclaimer: This Setup Guide is not a substitute for the operation manual.
The full manual, including safety information, must be reviewed prior to
setting up the ROHO Hybrid Select Cushion.
Remove the cover and unlock the ISOFLO
®
Make sure the ISOFLO is unlocked. Refer to the operation
manual.
Note: When the ISOFLO is unlocked, the air ows freely through
all of the air cells. You will not be able to inate the cushion
unless the ISOFLO is unlocked.
Open the ination valve.
Notes: To open, turn at least one
full rotation. The ination valve
will spin freely when open. You
can use the hand pump nozzle to
open the ination valve.
ISOFLO Memory Control
Quick Disconnects
Unlock
GREEN KNOB
Open
Close
Using a stable surface, such as a table, unzip and open
the cover. Turn the product over and make sure the quick
disconnects are securely connected to the ISOFLO.
Note: When attaching the quick disconnects: The tubes can be
attached in any order. If using the Hybrid Select without the IT Air
Pad, refer to the “Ooading Option” in the provided instructions.
Allow air to escape from the
ination valve. Listen (or place
a hand in front of the ination
valve) to see if the airow has
stopped.
Perform Atmospheric Ination
Inate with the hand pump until
all of the air cells feel rm.
Note: All air cells will inate at the
same time.
Remove the hand pump, and
DO NOT close the ination
valve.
Close the ination valve
completely. The cushion is
now inated to atmospheric
pressure.
Make sure there is no weight
on the air pad before starting. If
the individual is on the cushion,
transfer o before beginning.
6