Perun V2 Hybrid - User Manual

1
Perun V2 Hybrid
User and installation manual
Perun V2 Hybrid replaces mechanical contacts in your airsoft replica or gel blaster and provides lots of
useful features. Optical and magnetic sensors allow to eliminate many moving parts that are prone to
damage, thus increasing the reliability. The elasticity of this unit gives you certainty, that replica made
from parts from different manufacturers will not have any incompatibility issues. Adaptive trigger
control allows switching from a very short trigger travel to a long one even in the field, with almost any
trigger, including stock ones.
Reading this manual will help you fully exploit this unit’s potential and in case of encountering any
problems, you can look for solutions to them here.
Manufacturer:
Perun
Barwicka 8 St.
60-192 Poznań, Poland
e-mail: info@perunairsoft.pl
Table of contents
1. Technical data.................................................................................................................................. 2
2. Installation ....................................................................................................................................... 3
3. During the start-up .......................................................................................................................... 5
4. Adaptive trigger control .................................................................................................................. 5
5. Features and programming ............................................................................................................. 6
6. Factory settings ............................................................................................................................... 8
7. Diagnostic system ............................................................................................................................ 9
8. Sensor check .................................................................................................................................. 12
9. Modifications needed in Krytac and other gearboxes .................................................................. 13

Perun V2 Hybrid Specifications

General

Adjustable trigger sensitivity	Yes
Li-Po/Li-Ion/Li-Fe ready	Yes
Short-circuit protection	Yes
Overheat protection	Yes
Type	Electronic
MOSFET type	N-channel
Active brake	Yes
Precocking	Yes
ROF control	Yes

Summary

Technical Data

Recommended power sources

Details on compatible voltage ranges and battery types for optimal performance and safety.

Compatibility and Gearbox Support

Information on compatible replica types, gearboxes, gears, and triggers for seamless integration.

Key Features: Fuse and Connectors

Overview of integrated electronic fuse functionality and battery connector type.

Installation

Stand-by Current Consumption

Guidance on minimizing battery drain when the unit is not in use to prevent damage.

Core Installation Steps

Step-by-step instructions for disassembling the gearbox and placing the Perun V2 Hybrid unit.

Testing and Wiring

Procedures for connecting the battery, performing sensor checks, and wiring accessories.

Final Assembly

Completing the gearbox and replica reassembly, ensuring proper wire management.

During the start-up

Adaptive trigger control

Features and programming

Programming Mode Entry and Overview

Instructions on how to enter programming modes for SEMI and AUTO selector positions.

Firing Modes and Active Brake Settings

Configuration options for firing modes (semi, burst, auto) and active brake levels.

Trigger Response Customization

Adjusting precocking, binary trigger, two-stage trigger, and trigger sensitivity settings.

Performance and System Settings

Customizing ROF reduction, DMR mode, Li-Po alarm, DSG, and master reset functions.

Factory settings

Diagnostic system

Sensor and Fuse Diagnostics

Troubleshooting issues related to motor connection, fuse activation, and gearbox cycle detection.

Power and Environmental Issues

Identifying problems caused by temperature, battery voltage, or external magnetic fields.

Hardware Failure Indicators

Diagnosing main transistor damage or battery voltage sensing malfunctions.

Common Operational Problems and Solutions

Resolving issues like 2-round bursts, non-firing replicas, motor overheating, or voltage drops.

Sensor check

Selector Sensor Status

Verifying correct detection of SAFE, SEMI, and AUTO selector positions.

Trigger Sensor Status

Confirming the trigger pull is accurately detected by the unit.

Sector Gear Sensor Status

Checking that the sector gear movement is correctly registered by the sensor.

Modifications needed in Krytac and other gearboxes

Krytac Gearbox Modifications

Specific adjustments required for Krytac gearboxes to ensure proper Perun V2 Hybrid installation.

G&G G2 Gearbox Modifications

Details on necessary modifications for G&G G2 gearboxes.

Cyma Gearbox Modifications

Information regarding modifications for Cyma gearboxes, particularly contact screw holes.