3.Tone Function Test
Press the tone button, the receiver will make a sound.
1. Please keep in mind the dog channel you choose and do not
change to other one, or the remote control will be invalid.
2. You need to pair remote transmitter and receiver before use it on
the dog. Please follow the manual for the rst use.
3. The transmitter will fall into sleep mode after 30 seconds if no
interaction. Please reactivate it by pressing any button on the
remote.
4. When the transmitter turned off, it will not produce any functions
when press buttons except for the LED light button
1.Correct wearing position helps healthy and effective pet training.
Receiver shall be placed on bottom of the pet’s neck, and the
screw cap must contact the pet’s skin directly.
2.If you dog has thick fur on the neck, please use longer screw
caps.
3.The anti-abrasion buckle could prevent skin abrasion. It is
recommended to use it 2 to 3 times a week.
4.The space between receiver collar and the pet’s neck shall be
maintained to a nger distance, which can’t be too loose,
otherwise statice effectiveness shall be badly inuenced.
5.The extra part of the nylon strap can be trimmed, or be handled
with other methods.
How to Wear Receiver Collar Correctly
08
To Next Page
