OPERATION AND FUNTIONS
Charge the Remote Transmitter
1.Connect the charger cable to the charging port.
2.Plug the charger into a standard outlet.
3.The battery icon will ash during charging and be solid when
charging is completed.
power button
USB charging port
To turn the transmitter on and off
1.Press power button to turn on/off the transmitter. The backlight is
on/off.
2.The backlight will stay for about 30 seconds, if no operation then
the backlight off.
Charge the Collar Receiver
1.Open the rubber cover, connect the receiver to a charger into a
standard socket.
2.The indicator light ashes red slowly during charging, while the
red light keeps on when fully charged.
To Turn the Receiver Collar on and off
1.Turn on: Press the power button once, the receiver will make a
short “beep” sound, means that the receiver is turned on.
2.Turn off: Press the power button once, the receiver will make a
long “beep” sound and LED light no ash any more.
06
To Next Page
Loading...