PETKIT AIRSALON MAX - Cleaning & Maintenance; Dismantling Parts

CLEANING & MAINTENANCE
05
1. DISMANTLING PARTS
It is recommended to regularly remove the inner wall of the device, the removeable air
outlet base plate and the air inlet filter plate for cleaning and wiping aer drying.
-14-
① Remove the air inlet filter plate and filter screen:
Step 1: Use a screwdriver to unscrew the screw on the handle of the air intake filter plate.
Second step, use your fingers to buckle the bottom of the filter plate (as shown in the
picture),pull out the air inlet filter plate while liing it upwards.
Third step is to pull out the filter screen with your fingers from the back of the air intake
filter plate.
RETURN TO
CONTENT