Regularly checking, cleaning, or replacing these filters ensures that your
sprayer operates efficiently and maintains optimal performance.
8
STEPS TO CHECK, CLEAN,
OR REPLACE THE TANK FILTER:
1. Unthread the Hose Connection:
Unthread the hose connection from the
tank by hand.
2. Remove the Pickup Hose:Remove
the pickup hose from inside the tank.
3. Remove and Inspect the Filter:
Locate the filter at the bottom of the
pickup hose,
inspect it for any debris or
damage.
4. Clean the Filter: If the filter is dirty, use
a soft brush and clean water to remove
debris gently. Ensure it is clean before
reassembly.
5. Replace if Necessary: If the filter is
damaged, replace it with a new one.
6. Reassemble the Pickup Hose: Reattach
the filter to the bottom of the pickup hose,
insert the hose back into the tank, and
rethread the hose connection onto the
tank.
To Next Page
