Petsafe PIG19-16413 - In the Box; You May also Need; How the System Works

petsafe.com 5
DEITNL
ES
FR
EN
In the Box
You May Also Need
• Additional wire and flags (Part #PRFA-500)
• Additional wire connectors
• Additional gel-filled capsules
• Drill and mounting hardware
• Tape measure
• Small cross-head screwdriver
• Pliers
• Staple gun
• Scissors
• Lighter
• Shovel or lawn edger
• Wire stripping pliers
• Waterproofing compound (e.g. silicone caulk)
• PVC pipe or hose pipe
• Circular saw with masonry blade
• Non-metallic collar and lead
For setup and training help please visit www.petsafe.com.
How the System Works
A signal travels from the fence transmitter through a buried wire, marking the boundaries you wish to set for your
pet. Your pet wears a receiver collar that detects the signal at the boundary. As your pet approaches the boundary,
the receiver issues a warning tone. If he proceeds further, he receives a safe but startling static stimulation. While
harmless, the stimulation will persuade him to stay in the containment area you have established. Boundary flags are
a temporary visual aid for your pet; remove them after training. This PetSafe
®
Rechargeable In-Ground Fence
™
system
has been proven safe, comfortable and effective for pets over 2.3 kg.
Test Light
Tool
Gel-filled
Capsules
Receiver Collar with
Short Contact Points
Fence Transmitter
Boundary
Flags
(50)
Power
Adaptor
Boundary Wire
Wire
Connectors
Mounting
Bracket
Long
Contact Points
Receiver
Charger