STEP 4 AT
TACH TO COLLAR
Note: Do not place unit on your dog without reading the
Training Manual.
Collar material thickness
should be approximately
1/16", and no wider than
1". Slide the collar under all
four clips. Be sure the unit
is placed in the center of
the collar, opposite of the
buckle, and fits snuggly against
the middle of the dogʼs throat.
The microphone may not
activate properly if the unit
is rotated to the side or if
the collar hangs too loosely. Remove any tags from the collar to
avoid triggering a false stimulation.
STEP 5 OBSERVE FIRST REACTION
Observe your dog's first reaction to the correction. As
excited as your dog may get, you must remain calm. Yelping or
cowering is a normal response. Your pet must clearly understand
the reason for the stimulation in order to change his behavior.
Modifying your dogʼs barking behavior may take several days.
PG. 4
To Next Page
Loading...
