PetSpy XPro User Manual

Restricts wearing the collar for more than 4 hours daily to ensure pet safety.

Do not leave the dog unattended for over 2 hours while wearing the collar.

Reposition the collar on the dog's neck every 1 to 2 hours for comfort and safety.

Verify collar fit to prevent excessive pressure and potential skin damage.

Utilize conductive silicone caps for added safety and to prevent skin irritation.

Never attach a leash to the electronic collar to avoid excessive pressure on contact points.

Use a separate collar for a leash to avoid pressure on the electronic collar.

Wash the dog's neck area and collar contacts weekly to maintain hygiene.

Discontinue use if rash/sore appears; consult vet if condition persists beyond 48 hours.

Press and hold to turn the remote on and off.

Selects which collar is controlled; one collar per channel.

Delivers vibration correction; times out after 10 seconds or release.

Delivers static shock correction; times out after 10 seconds or release.

Sends an audible tone to the dog for interaction.

Button to change the intensity of vibration correction.

Button to change the intensity of static shock correction.

Locks the remote to prevent accidental use; press again to unlock.

Displays selected vibration level from 1 to 16.

Displays selected static shock level from 1 to 16.

Shows which collar channel is currently under control.

Indicates when the remote is locked.

Use test light on contact points and press shock button to verify shock.

Press vibration button to confirm receiver collar vibrates.

Press tone button to confirm receiver collar beeps.

Outlines intended use of the product and advises consultation for suitability.

Specifies that the product is for dogs only and not for harmful or provocative purposes.

States the company's non-liability for damages arising from product use or misuse.

Reserves the right to change terms, conditions, and notices.