PEUGEOT 207cc User Manual

9
!
i
i
PRACTICAL INFORMATION
123
CHANGING A BULB
Procedure for the replacement of a
faulty bulb with a new bulb without the
use of tools.
1. Direction indicators
(PY 21 W amber).
2. Side lights (W 5 W).
3. Dipped headlamps (H7-55 W).
4. Main beam headlamps (H1-55 W).
5. Directional headlamps
(H7-55 W).
6. Fog lamps (H11-55 W).
Changing the direction indicators

Handle the bulbs with a dry
cloth.
The headlamps are fitted with po-
lycarbonate glass with a protective
coating:

do not clean them using a dry
or abrasive cloth, or using a
detergent or solvent product,

use a sponge and soapy water.
In certain climatic conditions (low
temperature, humidity),
conden-
sation on the internal surface of
the headlamp glass is normal
; it
disappears a few minutes after the
lights are switched on.
Model with dipped headlamps with
elliptical module and directional
headlamps
Amber coloured bulbs, such as the
direction indicators, must be repla-
ced with bulbs of identical specifi-
cation and colour.

Turn the bulb holder one quarter of a
turn and remove it.

Pull the bulb then change it.
To refit, carry out these operations in re-
verse order.
Front lights
Model with conventional lights
Blown bulb
A message appears on the multifunc-
tion display to indicate the bulb to be
changed.
Refer to the appropriate procedure to
change the corresponding bulb.

PEUGEOT 207cc Specifications

General

Brand	PEUGEOT
Model	207cc
Category	Automobile
Language	English