PEUGEOT 207cc User Manual

7
!
DRIVING
107
On a steep descent, the speed lim-
iter will not be able to prevent the
vehicle from exceeding the pro-
grammed speed.
To prevent the mat from becoming
caught under the pedals:
- ensure that the mat is positioned
correctly,
- do not fit one mat on top of an-
other.
Programming

Turn dial
1
to the
"LIMIT"
position:
the speed limiter mode is selected
but is not switched on (OFF).
Exceeding the programmed speed
Pressing the accelerator pedal to exceed the programmed
speed will not have any effect unless you press the pedal
firmly
past the
point of resistance
.
The speed limiter is deactivated temporarily and the pro-
grammed speed, which is still displayed, flashes.
Returning to the programmed speed, by means of intention-
al or unintentional deceleration of the vehicle, automatically
cancels the flashing of the programmed speed.
Return to normal driving

Turn dial
1
to the
"0"
position: the speed limiter mode is
deselected. The display returns to the distance recorder.
Operating fault
In the event of a speed limiter mal-
function, the speed is cleared result-
ing in flashing of the dashes. Contact a
PEUGEOT dealer to have the system
checked.
You do not have to switch the speed
limiter on in order to set the speed.

Switch the speed limiter off by pressing button
4
: the dis-
play confirms that it has been switched off (OFF).

Switch the speed limiter back on by pressing button
4
again.

Set the spe
ed value by pressing button
2
or
3
(e.g.:
70 mph (110 km/h)).
ed value by pressing button
70 mph (110 km/h)).
ed value by pressing button
You can then change the programmed speed using buttons
2
and
3
:
- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.

Switch the s
peed limiter on by pressing button
4
.

PEUGEOT 207cc Specifications

General

Brand	PEUGEOT
Model	207cc
Category	Automobile
Language	English