Following this operation, if you wish
to disconnect the battery, lock the
vehicle and wait at least five minu-
tes for the zero reset to be taken
Service indicator zero reset
After each service, the service indicator
To do this, carry out the following pro-
press and hold the trip distance re-
corder zero reset button,
switch on the ignition; the distance
recorder display begins a count-
when the display indicates
lease the button; the spanner disap-
The distance remaining may be
weighted by the time factor, depend-
ing on the driver’s driving habits.
Therefore, the spanner may also
come on if you have exceeded the
two year service interval.
For 5 seconds after the ignition is
indicate that the service must be carried
the service is overdue by
For 5 seconds after the ignition is
switched on, the display indicates:
5 seconds after the ignition is switched
on, the distance recorder resumes its