PEUGEOT 308 SW User Manual

i
i
34
INSTRUMENTS and CONTROLS
Following this operation, if you wish
to disconnect the battery, lock the
vehicle and wait at least fi ve minutes
for the zero reset to be taken into
account.
Service indicator zero reset
After each service, the service indicator
must be reset to zero.
To do this, carry out the following pro-
cedure:
 switch off the ignition,
 press and hold the trip distance re-
corder zero reset button,
 switch on the ignition; the distance
recorder display begins a count-
down,
 when the display indicates "=0" , re-
lease the button; the spanner disap-
pears.
The distance remaining may be
weighted by the time factor, de-
pending on the driver’s driving
habits.
Therefore, the spanner may also
come on if you have exceeded the
two year service interval.
Service overdue
For 5 seconds after the ignition is
switched on, the spanner fl ashes to in-
dicate that the service must be carried
out as soon as possible.
Example: the service is overdue by
300 miles (km).
For 5 seconds after the ignition is
switched on, the display indicates:
5 seconds after the ignition is switched
on, the distance recorder resumes its
normal operation. The spanner re-
mains lit .
Retrieving the service information
You can access the service information
at any time.
 Press the trip distance recorder
zero reset button.
The service information is displayed for
a few seconds, then disappears.

PEUGEOT 308 SW Specifications

General

Brand	PEUGEOT
Model	308 SW
Category	Automobile
Language	English