Component which has a tinted glass
panoramic surface to increase the light
and visibility in the passenger compart-
ment.
Fitted with an electric shutter in several
sections to improve temperature and
noise related comfort.
If the shutter meets an obstacle
during operation, you must reverse
the movement of the shutter. To do
this, press the control concerned.
When the driver operates the shut-
ter control, he must ensure that no
one is preventing correct closing of
the shutter.
The driver must ensure that pas-
sengers use the shutter correctly.
Be aware of children when operating
the shutter.
- manual mode
Pull or press control A gently.
The shutter stops when you
release the control.
- automatic mode
Pull or press control A fi rmly.
One press opens or closes the
shutter completely.
Pressing the control again stops
the shutter.
Safety auto-reverse
In automatic mode and at the end of its
travel, if the shutter meets an obstacle
while closing it stops and moves back
slightly.
One-touch electric shutter
There are two options for opening and
closing:
If the shutter’s supply is cut off, the
safety auto-reverse must be reini-
tialised:
press the control until the
shutter is fully closed.
If the shutter re-opens during the
closing manoeuvre, and immedi-
ately after it stops:
pull the control until the shutter
is fully open,
press the control until the
shutter is fully closed.
The safety auto-reverse function
is not operational during these
operations.