Thread tension
To set the thread tension, turn the thread tension dial as
illustrated. Depending on the fabric, batting, thread, etc,
the tension may need to be adjusted.
See Stitch Overview, page 8 for thread tension
recommendation for all stitches.
Correct tension
For the best stitch appearance and durability, make sure
the needle thread tension is correctly adjusted. For
general sewing, the threads evenly meet between the
two layers of fabric.
Tension too tight
If the bobbin thread is visible on the top side of the
fabric, the needle thread tension is too tight. Reduce the
needle thread tension.
Tension too loose
If top thread is visible on the underside of the fabric, the
needle thread tension is too loose. Increase the needle
thread tension.
For decorative stitches and buttonholes, the top thread
should be visible on the underside of the fabric.
Make a few tests on a scrap piece of the fabric you are
going to sew and check the tension.
18
To Next Page
Loading...
Need help?
General
