Pfaff 3701 Series - Selecting the User Level

Controls
10
No
No
VAL
2.03.04 Selecting the user level
● Switch on the machine.
● Press the TE/Speed key to call up the parameter input function.
● By pressing the corresponding +/- key select the parameter "798".
● By pressing the corresponding +/- key select the parameter group "700".
● By pressing the corresponding +/- key select the desired user level:
"0" = operator level A
"1" = technician level B
"11" = service level C
The respective level is displayed on the screen. (see arrow)
● Press the TE/Speed key to take over the value and change to the sewing mode.
No
A 798 0
TE
No
A 101
TE
No VAL
798 1
TE
B