Pfaff Automatic 260

1.
Machine
Skips
Stitches
Cause
Remedy
Needle
incorrectly
inserted.
Push needle up a far as it will
go and be sure that
the
long
groove
laces toward you, and flat side of
shank
away
from you.
Wrong
needle. The correct needle system is stamped
on bed
slide. (For
ordinary
sewing.
use System 130 R needles.)
Needle bent,
Insert new needle.
Machine
threaded
improperly.
Check and correct threading
as
instructed
on pages
16 and 17.
Needle too fine
or too thick for the thread.
Use
correct needle
and thread.
2.
Needle
Thread Breakc
Cause:
Remedy:
The
above mentioned may cause
thread
breakage. See
remedies
listed under 1. above.
Thread
tension too tight.
Adlust
tensions as instructed.
Poor
or
knotty thread used. Use
good quality threads
only.
29