Pfaff Automatic 260

.....
Hook
raceway is
jammed
with
thread or needs oiling.
Clean and oil hook raceway.
Burn or
sharp
edges
on needle
plate slot.
Polish needle plate
slot
wilh
fine emery cloth.
3.
Needle
Breaks
Cause:
Bent needle
strikes
point at sewing hook.
Needle too
thin cr thread
tao neavy
fabric
pulls
needle
so
it bends and strikes needle plate.
Bobbin
case
inserted
incorrectl’.
4. Faulty Stitch
FormatIon
Cause:
Improper
tension.
Thread
tao heavy, knotty
or
hard.
Bobbin unevenly wound.
Pieces
at thread between tension discs.
lemed 1 :
Replace needle a ance
to prevent further damage.
Use
correct needle
and
thread sizes.
Dont
farce the
feeding
motion. Guide the material
lightly.
Push bobbin case
until
you
hear it snap into
place.
Remedy:
Adjust tensions
as
Instructed.
Use
only first.rate thread .. the correct size for the needle and fabric.
Dont run thread over finger
when
winding the bobbin, but lead
it
around thread
retainer stud on
top
cover and through thread guide.
Raise presser bar lifter and remove thread.
30