Pfaff Automatic 260

5. Machine
Feeds
Improperly
Cause:
Remedy:
Feed
dog
set
too low, does
not rise
up enough
Hove
your PlaIt dealer make the
necessary adjustment.
above
needle
plate level.
Accumulations
ol nI packed between
feed teeth,
Take
off
needle
plate and
remove lint
with
a
still brush.
6.
Machine Works
Heavily
Cause Remedy
Motor
belt has shrunk
and causes excessive pressure
Have your Pfaff deajer
adjust the belt
tension.
on
bearings.
Hook
raceway
tacks oil
or
is
obstructed by
pieces of Clean and oil
hook
raceway.
thread.
Mechanism
ctoggecl
by
inferior oil.
Use
only
Pfcifi
sewing machine
oil -- never salad oil or
glycerine.
Bobbin
winder working
white sewing
(when
a bobbin
Stop bobbin winder.
is
not being
filled).
Thread
Jamming
The
new PFAFF
rotary hook
will not
normally
jam,
even if the machine
should be
handled improperly.
If
thread
should
happen to jam in the
raceway
of the
sewing hook,
the
power of
the
motor
will
be
sufficient
to over
come hard
working
of
the
mechanism.
Thread
jamming
can be avoided,
however,
by following
the instructions on
page 4.
31