Pfaff Automatic 362 User Manual

The Transverse Spool Holder
To
ensure that the thread will unwind evenly from a cross-wound spool, use
the transverse spool holder. You can buy the transverse spool holder
from your
Pfoff
dealer.
To attach the
spool holder,
slip position spring
I
over
the
vertical spool pin,
the bent portion of the spring pointing toward
you.
Push the spool of thread
on spool pin
2. Press the position spring
together,
and push pin 2 into
the spring
slot. With
the spring pressed together, adjust
its
position on the
vertical spool
pin, as required. When you release the
spring, the
transverse
pin
will
be
held
in
place
firmly. Pass the thread through eyelet 3, and thread the machine as
instructed.
All-Purpose Sewing Foot (with Clear-View Shoe)
All-purpose
sewing foot No. 51991 is attached as instructed
on page
24.
The transparency
of its
shoe
facilitates
all
sewing operations
where it is important to watch the needle
penetrate the
fabric.
Special application
possibilities are discussed on the preceding
pages.
Sewing
feet and
attachments which are not
included in the accessory
box of your sewing machine can be obtained from your
Pfaff dealer.
R 6533
56

Pfaff Automatic 362 Specifications

General

Brand	Pfaff
Model	Automatic 362
Category	Sewing Machine
Language	English