1:17
1:17
20
21
A
21
Operate your Pfaff select
Reverse sewing
The machine sews in reverse only as
long as the reverse sewing button (20) is
pressed.
Stitch length adjustment dial
With the stitch length adjustment dial (21)
you can adjust the stitch length between
0 and 6 mm by turning the point marking
on the button to the required length.
Between the numbers 0 and 1 you will
À nd the “buttonhole” symbol. This area
is the optimum stitch density for sewing
buttonholes and embroidering.
The further you turn the dial to 0, the
higher the density of the stitch.
To sew stretch stitches (dark
background), you must turn the stitch
length adjustment dial (21) as far as it will
go in the grey area.
To Next Page
Loading...
Need help?
General
