1:10
1:10
B
A
D
C
E
G
F
F
H
Operate your Pfaff select
Threading the needle thread
Switch off the main switch
Raise the presser foot lifter (19) and
turn the handwheel until the take-up
lever (9) has moved to the top. Place the
thread on the spool holder (8) and À t the
corresponding spool cap.
Now, using both hands, pull the
thread into guide A and under thread
guide hook B. Pass the thread through
the lefthand threading slot C and
downwards. Pull the thread around stop
D into the righthand threading slot and
upwards E to the take-up lever F.
The thread must be pulled into the
take-up lever F from left to right and
downwards again in the right hand
threading slot. Floss the thread from the
side behind one of the two thread guides
H.
To thread the needle, stick the thread
from front to back through the needle eye.
To thread the needle using the needle
threader, please refer to the next page.
To Next Page
Loading...
Need help?
General
