2:14
Utility stitches and practical sewing
Fully concealed, sew-in zipper
• Insert the zipper foot on the right side.
• Baste in the zipper and lay it
underneath the presser foot so that the
teeth of the zipper run alongside the foot.
• Stitch in half of the zipper, leave the
needle in the fabric, raise the presser foot
and close the zipper.
• Now you can continue sewing the
seam up to the end of the zipper and sew
the cross seam.
• Sew the second half of the zipper
parallel at the same distance.
• Stop after the À rst half and leave the
needle in the fabric. Raise the presser foot
and open the zipper.
• Now you can À nish sewing the seam.
To Next Page
Loading...
Need help?
General
