3:3
Maintenance and trouble-shooting
Changing the sewing bulb
Switch off the main switch.
• Disconnect the main plug and the foot
control plug from the machine.
• Take off the removable accessory tray
(15).
The sewing bulb is located inside the left
side of the sewing machine.
Removal:
• Hold the sewing machine tightly.
• Push the bulb into its socket as far as
it will go.
• At the same time, turn the bulb a half
turn anti-clockwise and remove it.
Insertion:
• Insert the bulb in the diagonal socket
and turn it so that both stops of the bulb
engage.
• Now push the bulb fully into the
socket and turn it clockwise so that it is
held À rmly.
Note: The bulb changer (available as a
special accessory) will make changing the
bulb much easier.
Important!
The maximum allowed wattage of the
bulb with a plug-in socket is 15 watts!
To Next Page
Loading...
Need help?
General
