Pfaff creative 1371

Balancing
out or
adjusting the reverse
stitch
length
1. The
baIancingout key is
used to
adapt
the stitch density
in the
buttonhole
seam as well
as
the
length
of this seam (program
13).
With this key
set at — the stitch
density in the buttonhole
seam
increases
and the
seam length
decreases.
With this key set at +
the stitch
density in
the buttonhole
seam
decreases
and
the
seam length
increases.
The
length of the reverse stitches
can be adjusted from
—7 to
+7,
the
normal setting being
0.
2. Adjusting
letter and number
combinations:
i’
Combination
.,*
progr:
32
24
22
26
22
26
Adjusted by
+3:
Rule:
If the pattern or program
entered last is adjusted and entered
with
— or +, this adjustment is
applied
to
the entire program
combination.
30
26
26
22