Pfaff creative 1371

First
workstep,
middle motif
•
Select
program 42
•
Stitch
length 0.3 mm
•
Pattern
length 8.0
•
Press
program entry key
143
•
Select
program 35
•
Press program
entry key 143
• Select
program 42
•
Stitch
length 0.3 mm
•
Pattern
length 8.0
• Press
program
entry key 143
• Select
program 24
2
•
Press
program entry
key
143
•
Sew the
stored program.
Border
2
I
prog
--
L
• Select
program
43
• Stitch width 4.0 mm
•
Pattern length 25
•
Press “single pattern” key
• Press “needle down” key.
Sew
the
selected pattern until the needle stops
down in the material (1 in Fig.
3).
Turn
the material
through 90° (2 in Fig.
3).
Sew the pattern
until the
needle stops down in the material
(3
in Fig.
3).
Turn the material
through 180° (4 in Fig.
3),
then
sew
the pattern
backwards, as shown in Fig.
2.
Repeat these
two sewing actions until the border
is
complete (Fig. 2).
Ornamental
borders
You can give free rein to your
creativity
by
com
bining
various patterns. The ornamental borders
illustrated on this page and
described below are
intended
as a
stimulus to your imagination.
•
For sewing ornamental borders we recom
mend
using
the
fancy-stitch
sewing foot No. 2.
•
Place tissue paper
under the fabric.
This will help you to achieve
better sewing
results.
Border 1
consists of
the following
programs:
4235 24
27
•-_%
Second workstep,
outer motiv
• Select program
27
•
Sew
the
selected program
along either
side
of
the middle
motif.
9IIlllIIljlj}IIII}Ilfllllllfl’
itlllIIItIlIITllhIllhIIllNh
43