Pfaff Creative 1467A - Page 58

Fringe seams
Butterfly
Three worksteps are required for this:
First workstep (wings)
c_L_L_ 1
2—3
Fnngefrn
Stitch width: 1.5
mm
Stitch
length:
0.5
mm
Fringe foot:
(special accessory)
First
workstep (wings)
First
sew a
fringe seam as a
trial, using a pk
of scrap
material. During sewing, try
differ
‘r
stitch lengths until you
find the one most s
iS
able.
The wings are best
sewn in circi I
seams,
working from the outside
inwards.
Second
workstep (body)
prog
T
JT
Pattern length:as required
Second
workstep (body)
Sew the body as
shown in the
illustrat ir
(Fig. 1).
Third workstep
Finally sew the antennas
with small zigzag s S
ches,
adding the
dots
at their tips by
sewinc,,
program
43
stitch
pattern (Fig. 1), using
• stitch
width
4.0 mm
• pattern length 5.0
Flower
pro
10 43 44 —3+ 2
Mark out the pattern
of
the
flower on the fabri:.
Sew
the petals,
stem
and
leaves as shown in tt
illustration. Now fill
in
the seed
capsule using t S
fringe foot, working
spirally from
the
outsic
inwards (Fig.
2).
2