9:14
Embroidery mode - stitch-out
Change to Cutwork Needle ( optional accessory)
Some cutwork designs can be stitched out using the
optional accessory PFAFF® Embroidery Cutwork
Needle Kit, (P/N 820 945-096). These designs
are marked with a cutwork needle symbol in the
creative sensation™ Embroidery Collection. When
the machine stops and this pop-up message is
shown, insert the corresponding cutwork needle.
Touch OK and press the Start/Stop button to
resume.
Note: These cutwork designs can also be stitched out
without the cutwork needles, but will then have to be cut
manually.
Main motor overloaded
If the machine is blocked when embroidering, the
main motor can get overloaded. When the main
motor and power supply are no longer overloaded,
the OK button will be enabled. Touch OK to resume
embroidering.
To Next Page
Loading...
