Pfaff PowerLine 2231 User Manual

31
Care and maintenance
Before commissioning the machine, fi ll in oil through hole 1 until the oil level
indicator 2 is at the "MAX" marking.
PFAFF 2235 BASIC and PFAFF 2235 PLUS
Check the oil level daily before starting the machine!
The level of the oil in indicator 2 must not sink below the "MIN" marking and
not exceed the "MAX" marking.
If required, fi ll oil into the tank through hole 1.
PFAFF 2235 PREMIUM
The oil level is controlled by sensor.
When the minimum oil level is reached, key B on the machine head shines red
(see Chapter 7.04 Keys on the machine head).
If required, fi ll oil into the tank through hole 1.
Oil level indicator 2 must not exceed the "MAX" marking.
Only use oil with a medium viscosity of 22.0 mm²/s at 40° C and a density
of 0.865 g/cm³ at 15°C!
We recommend PFAFF sewing-machine oil, part No. 280-1-120 144.
9.03 Lubricating
Max
Min
Fig. 9 - 02
1
2

Pfaff PowerLine 2231 Specifications

General

Brand	Pfaff
Model	PowerLine 2231
Category	Sewing Machine
Language	English