37
Commissioning
7.02.03 With model PFAFF 2235 and drive AB 321
● Press button "P" on the control panel, while simultaneously switching the machine on.
● Enter code 3112 via the numbered keys and confi rm by pressing "E".
● Enter parameter 290 via the numbered keys and confi rm by pressing "E".
● Select mode 42 by pressing the +/- buttons.
● Press "P" twice to quit the input level.
● The new values are taken over when sewing is started, and these are maintained even
after the machine is switched off.
7.02.04 With models PFAFF 2235, 2542, 2545 / 46 and drive PF 321
● Press button "P" on the control panel, while simultaneously switching the machine on.
● Enter code 3112 via the numbered keys and confi rm by pressing "E".
● Enter parameter 290 via the numbered keys and confi rm by pressing "E".
● Press the +/- buttons for mode 00 for model 2235, and mode 01 for models 2542,
2545 / 46.
● Press "P" twice to quit the input level.
● The new values are taken over when sewing is started, and these are maintained even
after the machine is switched off.
To Next Page
Loading...
