Pfaff tipmatic 6152 User Manual

l' Changing the sewing lamp
~ Switch off the main switch
- Disconnect the mains plug and the foot
control plug from the machine.
- Take
off the detachable work support (14).
The sewing lamp is located inside
the needle
head
of the sewing machine.
Removal
To be able to change the sewing lamp, we
recommend placing
the sewing machine on its
side as illustrated.
- Hold
the sewing machine tightly .
-
Push the lamp into its holder as far as it will
go .
-
At the same time , turn the lamp a half turn
anti-clockwise and remove it.
Insertion
- Insert the lamp in the diagonal holder and
turn it so
that both stops of the lamp
engage.
-
Now push the lamp fully into the holder and
turn it clockwise
so that it is held firmly.
Note:
The lamp changer (available as a special
accessory) will make changing the lamp much
easier.
Important!
The maximum permissible wattage of the
lamp with a plug-in socket is 15 watts!
87
,.,
a
:3

Pfaff tipmatic 6152 Specifications

General

Brand	Pfaff
Model	tipmatic 6152
Category	Sewing Machine
Language	English