Pfaff tipmatic 6152 User Manual

e
a
'""
....,
iii
~
c:
iii
~
iii
I!I
n::
Borders
By combining different embroidery programs
you can embroider borders
of any width .
Madeira embroidery threads are very suitable.
They are available in many col or shades and
different sizes. However, only use one thread
size
for one piece of embroidery work .
-
Apply iron-on backing or place silk backing
paper under
the fabric.
- Embroider
with program Y/G, stitch width
5
~ over the marked middle poi nt . After
that. turn the fabric and sew the border
back again in reverse.
- Embroider stitch U
parallel to it.
-
Finally, add program X to every fifth zigzag
point.
62
In this border embroidery example mult i-colo-
red embroidery thread is used as an additional
effect.
- Apply iron-on backing or place silk backing
paper under the fabric.
- Embroider
with program V/F , stitch width ~
over the marked middle point . After that ,
turn
the fabr ic and sew the border back
again in reverse.
- Set program
X/G parallel to it .
- You can
now stitch the straight row with
program G, stitch width 3 - 4 mm and,
finally, the outside zigzag row with program
U/G, stitch width 5 ~.

Pfaff tipmatic 6152 Specifications

General

Brand	Pfaff
Model	tipmatic 6152
Category	Sewing Machine
Language	English