How to troubleshoot a Pfannenberg Chiller that does not cool, but the evaporator fan is running?
If your Pfannenberg Chiller unit isn't cooling but the evaporator fan is running, the temperature setting might be too high. Check the temperature setting.
What to do if condensate does not drain from Pfannenberg Chiller?
If the condensate isn't draining from your Pfannenberg Chiller, the drain might be blocked. Try cleaning the condensate drain. Also, ensure that the condensate drain hose isn't kinked and is installed with a downward slope.
Instructions for proper use and storage of the manual.
Pfannenberg's disclaimer regarding documentation accuracy and changes.
Defines target groups and required personnel qualifications for unit handling.
Explains warning signal words (DANGER, WARNING, CAUTION, ATTENTION) and notes.
Explains how handling instructions and cross-references are marked.
Specifies approved use, limitations, and environmental conditions for operation/storage.
Lists common ways the unit should not be used.
Outlines the responsibilities of the unit's operator.
Explains warranty conditions, what voids it, and return procedures.
Provides a diagram and list of cooling unit components.
Lists items included, optional components, and ordering information.
Explains the unit's operation, including air and refrigeration circuits.
Details safety features and how condensate is managed.
Explains information on the type plate and unit markings.
Provides detailed specifications for refrigeration, electrical, dimensions, and other data.
Crucial safety precautions before and during assembly.
Safe methods and warnings for transporting the unit.
Proper conditions for storage and steps for unpacking.
Essential general requirements for installing the cooling unit.
Steps for making cut-outs and fitting the DTS unit.
Steps for making cut-outs and installing the DTI unit.
Covers cable connection, circuit diagrams, and main connection.
Guide to setting DIP-switches for temperature control.
How to connect door contact and collective fault signal.
Adjusting for mains voltage and equipotential bonding.
Overview of unit operation, indicators, and temperature sensing.
How the unit operates, including switching thresholds and conditions.
How to use the service interface for parameter changes and data exchange.
Critical safety precautions for performing service and maintenance.
General notes on maintenance intervals and filter use.
Detailed schedule of required maintenance tasks.
Procedures for cleaning unit parts like heat exchangers and covers.
General guidance for identifying and resolving unit faults.
Lists possible error codes, their causes, and corrective actions.
Procedures for temporarily or permanently taking the unit out of service.
Safety, procedures for dismantling, and environmentally friendly disposal.
General| Brand | Pfannenberg |
|---|---|
| Model | DTS series |
| Category | Accessories |
| Language | English |
To Next Page
