Pfannenberg DTT 6101 - User Manual

Questions and Answers

A
Alexander LopezAug 11, 2025
Why Pfannenberg Computer Hardware unit does not cool sufficiently?
- D
  Dustin WhiteAug 11, 2025
  There are several potential reasons why your Pfannenberg Computer Hardware unit isn't cooling enough. It could be due to exceeding operating limits; you should check the ambient temperature and internal load. Other possible causes include too little coolant (in which case you should call authorized personnel to check for leakage), a dirty heat exchanger (clean it), a defect in the evaporator or condenser fan (in which case you should call authorized personnel to replace the fan), or a disturbance in the air circulation inside the cabinet (check the installation and air circulation path). Also ensure that the supply and outlet flow of air of the cooling unit is aligned with the inlet and outlet opening of the switch cabinet.
W
wooddouglasAug 17, 2025
What to do if condensate accumulates in the Pfannenberg Computer Hardware switch cabinet?
- T
  Thomas AndersonAug 17, 2025
  If condensate is accumulating in your Pfannenberg Computer Hardware switch cabinet, it could be due to several reasons. The exhaust temperature may be too high, so ensure the cabinet door is closed. The switch cabinet might not be sufficiently sealed; correct any leaky points or seals. Also, check the temperature setting.
T
tanya79Aug 23, 2025
What to do if condensate drains from the Pfannenberg Computer Hardware unit?
- M
  Michael PearsonAug 23, 2025
  If condensate is draining from your Pfannenberg Computer Hardware unit, it could be due to a defective condensate evaporator or too much condensate accumulation. Try replacing the fuses for the condensate evaporator. Another possible reason is that the switch cabinet is not sufficiently sealed. In this case, correct any leaky points or seals on the switch cabinet.
J
Jennifer RogersAug 29, 2025
What to do if condensate does not drain from Pfannenberg Computer Hardware?
- L
  Lisa ScottAug 29, 2025
  If condensate isn't draining from your Pfannenberg Computer Hardware, the condensate drain might be plugged up; clean it. Also, check whether the condensate drain hose is free from kinks and is installed with a downward slope.
S
Steven NewmanSep 4, 2025
Why Pfannenberg Computer Hardware unit cools only periodically?
- L
  Lisa GarciaSep 4, 2025
  If your Pfannenberg Computer Hardware unit cools only periodically, the temperature setting may be incorrect or the thermostat may be defective. Try setting it to a higher temperature.