EasyManua.ls Logo

Pfannenberg DTT 6101 - Flat Duct System (Option)

Pfannenberg DTT 6101
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENG
Operating Manual | Roof-mounted Cooling Unit | Multi Controller (MC) 230 V | 086100023d 15/80
3.4.4 Flat duct system (option)
WARNING
Danger of fire due to short-circuits
Formation of condensate in the switch cabinet can lead to a fire risk due to short-circuits.
Condensate can form on the flat duct system.
Check the flat duct system in the switch cabinet regularly for condensate formation.
Shut down the unit immediately and inform your superiors if condensate forms.
Find and remedy the cause of the condensate formation (e.g. switch cabinet not sealed tightly).
Fig. 4: Flat duct system
The flat duct system (2) supports the air distribution in confined switch cabinets. It ensures optimized cooling unit capacity with
adapted current consumption. The flat duct system (2) is used with a PAD-frame (1).
G00029

Table of Contents

Related product manuals