Why is condensate accumulating in my Pfannenberg DTT Cooling boxes switch cabinet?
Condensate accumulation in the switch cabinet can occur due to several reasons: * The exhaust temperature might be too high; try closing the cabinet door. * The switch cabinet may not be sufficiently sealed; correct any leaky points or seals. * Ensure that the temperature setting is correct.
What to do if condensate drains from my Pfannenberg DTT unit?
If condensate is draining from your Pfannenberg unit, consider these potential causes: * There may be a defect in the condensate evaporator, or too much condensate accumulates; replace the fuses for the condensate evaporator. * The switch cabinet may not be sufficiently sealed; correct any leaky points or seals on the switch cabinet.
How to fix a Pfannenberg Cooling boxes unit that cools only periodically?
If your Pfannenberg cooling unit is only cooling periodically, the temperature setting may be incorrect or the temperature setting is defective. Try setting the DIP switch to a higher temperature.
General| Power Supply | 24V DC |
|---|---|
| Dimensions (H x W x D) | Varies by model |
| Weight | Varies by model |
| Material | Aluminum |
| Enclosure Material | Aluminum |
| Mounting | Wall or ceiling mounting |
| Mounting Type | Wall or ceiling mounting |
To Next Page
