2
© Pfaudler GmbH
Corrosion Detector Portable CDP EXProof
1 Preface
The present operating instructions are
designed to familiarize users with the
equipment of the Corrosion Detector
Portable CDP EXProof and its use.
The operating instructions (OI) should
be accessible to the operating and
maintenance personnel in order to
ensure that all necessary information is
available for using the device.
By knowing these OI, you can avoid
damage to the measuring equipment
and prevent incorrect operation. The
information contained in the operating
instructions corresponds to the state
of the art at the time it is printed and
is provided to the best of our knowledge.
We reserve the right to include any
improvements, amendments and new
developments in the operating instruc-
tions without prior notice.
The actual design of products may
differ from the information provided
in the catalog if warranted by technical
modifications resulting from product
improvements.
The proposal submitted by Pfaudler for
a concrete application will be binding
in this case.
The latest edition will always supersede
all previous ones.
The present operating instructions are
made available to our customers and
interested parties free of charge.
Reprints and copies as well as transfor-
mation into electronic forms, in whole
or in part, shall require our written
approval.
All rights reserved.
2 General instructions
2.1 Intended use
The Corrosion Detector Portable (CDP)
may only be used for the inspection
of glass-lined vessels and internal parts
for damages and the resulting metal
corrosion. Apart from glass-lined reactors
and internal parts, it is also possible
to check reactors and internal parts with
other coatings (e.g., plastic material,
PTFE or rubber) for corrosion of metal.
The proper use of the device is described
in the present operating instructions.
All other applications of the device,
which are not described in the operating
instructions, are not permitted.
The measuring device is de-
signed for use in potentially explosive
atmospheres zone 1 and 2 according
to the directive 1999/92/EC. Non-
compliance with these instructions
may lead to dangerous conse-
quences. Please read the operating
instructions completely prior to using
the measuring device.
2.2 Warnings contained in the
operating instructions
In the operating instructions, the danger
symbol
m is used to draw your attention
to especially important safety instructions.
Compliance with these instructions
is mandatory, because adherence to the
instructions can avoid serious mistakes.
2.3 Notes on deliveries
The respective scope of delivery
is specified on the shipping documents
attached to the shipment and corre-
sponds to the valid purchase agreement.
Check that the items delivered are
complete and intact.
2.4 Transport and storage
The Corrosion Detector Portable CDP
EXProof should be exclusively trans-
ported and stored in its closed original
case. In order to ensure an as-new con-
dition of the device and accessories,
the following storage conditions should
be maintained:
Storage/transport temperature:
–25 to +70 °C without batteries
2.5 Notes on warranty
Any warranty claims shall not be extended
or limited by the information contained
in the present operating instructions.
For the exact warranty conditions,
please refer to the Terms of Sale of
Pfaudler Werke GmbH as amended.
All warranty claims will be void if the unit
is opened.
2.6 Notes on return deliveries
Before sending used immersion probes
to Pfaudler Werke GmbH, all parts must
be cleaned and decontaminated first.
To protect our staff and for insurance
reasons, your return shipment must
be accompanied by a clearance certifi-
cate on which you confirm that the
immersion probes were properly
cleaned and decontaminated. You may
obtain a form sheet for this purpose
from us on request (OI332).
Since the device may be used
in potentially explosive atmos-
pheres, all explosion protection
requirements must be satisfied.
Repairs or modifications of the de-
vice are not permitted.
To Next Page
Loading...