3)7*67$1'$5' 86$
3URFHGXUHLQFDVHRIIUHH]LQ JWHP SHU DWX UHV
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
________________________________________________________________________________________
3URFHGXUHLQFDVHRIIUHH]LQ JWHP SHU DWX UHV
After the machine has been cleaned:
1. Turn off the water supply.
2. Take out the mixing shaft.
3. Turn off the water connection, open the water outlet valve (2), release water
pressure in hose and close valve again. Uncouple the water hose (3) and empty it.
4. Open outlet tap (1) at the water manifold (2).
5. Remove the air hose from the spray gun and fit it to the water inlet.
To Next Page
Loading...
