3)7*67$1'$5' 86$
3URFHGXUHLQFDVHRIIUHH]LQ JWHP SHU DWX UHV
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
________________________________________________________________________________________
6. Switch on main switch (1) and press the green switch "ON" (2).
7. Switch ON air compressor.
8. Press the water flow button. The water is blown out of the manifold with
compressed air (at 1,5 bar for approx. 1 min.)
9. Empty the mixing pump by swivelling the entire pumping component upwards.
10.Uncouple the mortar hoses and empty them.
The machine is now empty apart from a small residue within the rotor/stator pump.
Nevertheless, the machine must be started very carefully on the next day!
To Next Page
Loading...
