17
If there are stains on the surface of the scooter, use a soft cloth and dip
in a small amount of water to wipe; lf there are stains that are dicult
to clean, smear them with toothpaste and brush them repeatedly,
then clean them with a damp cloth. lf the plastic parts of the body are
scratched, use sandpaper or other abrasive materials to polish them.
Do not use alcohol, gasoline, kerosene or other corrosive and volatile
chemical solvents to clean, otherwise it will seriously damage the
appearance and internal structure of the body. Do not use pressurized
water to spray and wash.
Ensure that the scooter is off and the charging port rubber cover is
tightly fastened during cleaning, otherwise electric shock or serious
failure may occur due to internal water ow. When not in use, store in
a dry and cool place indoors. Avoid outdoor storage for a long time.
Long-term sun exposure, overheating and cold outdoor environment will
accelerate the appearance and tire aging of the scooter, and reduce the
service life of the scooter and battery pack.
The product uses puncture-proof tubeless tires, please check the tire
pressure carefully before riding, and ensure the tire pressure is 45-
50 psi. When the tire height sinks 20%-30%, it is time to inflate. The
recommended tire pressure is 45-50 psi after inflation, and the tire
should be inated at least once every 2-3 months. Regular ination and
cleaning of tire surface debris can prolong the service life of the tire.
1. Do not use battery packs of other models or brands, or else there
may be safety risks.
2. It is strictly forbidden to disassemble, squeeze, or puncture this
Cleaning And Storage
Tips:
Tire lnation and Maintenance
Battery Maintenance
To Next Page
Loading...