53
Chapter 6: On-Screen Displays
Camera State
Mark-In Point
Trigger Frame
Mark-Out Point
Recording Duration
Time Stamp
Frame Rate
Serial Number / Name
Exposure Time
Resolution
Number of Frames Available
A green square indicates the recording has ended, and
a cine is stored in internal memory.
Indicates the user-defined start point, (the first frame),
of the cine to be saved.
Indicates the frame the camera detected a trigger
signal at when capturing the cine.
Indicates the user-defined end point, (the last frame),
of the cine to be saved.
Indicates the number of frames recorded in the
camera’s internal memory.
Indicates the total length of recording time (in minutes
and/or seconds).
Indicates the day of the year/hour:minute:second:
microsecond.
Indicates the user-defined frame rate.
Indicates the camera serial number or user-defined
camera name.
Indicates the user-defined Exposure Time
(in milliseconds or microseconds).
Indicates the user-defined resolution (width x height),
in pixels.
A
B
C
D
E
F
G
H
I
J
K
To Next Page
Loading...
