70Xi Cold Flow Properties Laboratory Analyzer User Guide
20
b. There are 5 different types of data files that can be downloaded from the analyzer to the
USB memory stick:
1) DIAGNOSTIC FILES FOR CUSTOMER SERVICE
This option downloads all necessary files for Phase Technology’s Customer
Service department to review and perform further data analysis for
troubleshooting
2) SUMMARY OF ALL TEST RESULTS (.CSV)
This option downloads a summary of all test results to a CSV file (Results.csv).
Spreadsheet programs like MS® Excel can be used to display the data and do
further analysis
3) DETAIL PHASE PLOT DATA OF INDIVIDUAL TESTS (.DAT)
This option will open another window for user to select individual tests and
phase plot data. Phase plot data files can be opened and viewed on an external
PC with Phase’s LTB program.
4) BACKUP SOFTWARE
Before upgrading to newer software, it is recommended to use this option to
backup the existing software onto a secondary (USB) memory device
5) FACTORY USE ONLY
Reserved for factory use only
c. Transfer file location: All files will be downloaded to the PHASE_70Xi/[Analyzer Serial
Number] (e.g. PHASE_70Xi/201030001) folder on the USB memory stick
To Next Page
Loading...
Need help?
General