Phenix Technologies 6CP200/100-10 User Manual

6CP200/100-10
9-2
CHECKING OIL PURITY
c. Freedom From Contaminants:
Absence of organic acids, corrosive sulfur, and other foreign materials, which might affect metals or insulation,
ensures long life for the oil as well as the electrical units.
d. High Interfacial Tension:
High interfacial tension shows the absence of soluble polar contaminants. Refinery sealed containers assure
maintenance of purity in transit.
e. Good Heat Transfer Properties:
Good circulation and rapid transfer of heat from the coils to the cooling fins are assured by low viscosities at all
operating temperatures.
Specifications
(Typical Test Data for Transformer Oil)
TEST
METHOD
UNITS
SPECIFICATION
Moisture
ASTM D1533
Mg/kg
35 max
Color
ASTM D1500
ASTM
0.5 max
DDF (Power Factor) @100ºC
ASTM D924
0.3 max
0.3 max
Breakdown voltage (2mm gap)
ASTM D1816
kV
35 min
Inhibitor Content
ASTM D2668
%w/w
0.30 max
Interfacial tension
ASTM D971
dynes/cm
40 min
Density @15ºC
ASTM D1298
g/ml
0.91 max
Viscosity @ 100ºC
ASTM D445
cSt
3.0 max
Viscosity @ 40ºC
ASTM D445
cSt
12.0 max
Viscosity @ 0ºC
ASTM D445
cSt
76.0 max
Refractive Index
ASTM 1218
Units
Carbon N%
ASTM D2140
%
Carbon A%
ASTM D2140
%
Carbon P%
ASTM D2140
%
Corrosive Sulfur
ASTM D1275B
Noncorrosive
PCBs – Detection Unit 1 mg/kg
ASTM D4059
mg/kg
Not Detected
Flash Point
ASTM D92
0ºC
145 min

Phenix Technologies 6CP200/100-10 Specifications

General

Brand	Phenix Technologies
Model	6CP200/100-10
Category	Test Equipment
Language	English