Phenix Technologies 6CP200/100-10 User Manual

6CP200/100-10
1-1
TECHNICAL SPECIFICATIONS
Input
220-240 volts, single phase, 50/60 Hz, 25 amperes
Output Rating
Series Connection: 200 kilovolts, 50 milliamperes
5 minutes ON / 15 minutes OFF @ 10 kVA
Parallel Connection: 100 kilovolts, 100 milliamperes
5 minutes ON / 15 minutes OFF @ 10 kVA
Single Cylinder: 100 kilovolts, 50 milliamperes
5 minutes ON / 15 minutes OFF @ 5 kVA
Type of Cooling
ONAN (Oil / Air Natural Convection)
Operating Ambient Temperature
10 – 40 degrees C
Output Termination
High Voltage Electrode
Metering - Digital
Output Voltmeter: 3 ½ Digit LCD, Accuracy ±(0.8% of reading + 0.2% of range)
2 Ranges: 0-100kV, 200kV
Output Currentmeter: 3 ½ Digit LCD, Accuracy ±(0.8% of reading + 0.2% of range)
4 Ranges: 0-200µA, 2mA, 20mA, 200mA
Sizes and Weights
Control/Regulator Section: 21.25” (540mm) W x 16.75" (426mm) D x 13.75" (350mm) H;
220 V – 52 lbs (24 Kg)
High Voltage Cylinder (2): 16" (406mm) W x 16" (406mm) D; X 30” (762mm) H;
178 lbs. (81 kg)
High Voltage Divider: 9" (229mm) W x 9" (229mm) D; X 43” (1092mm) H;
40 lbs. (18 kg)
Additional Equipment
Cart (2): 22.5” (572mm) W x 29.25” (743mm) D x 50” (1270mm) H;
61 lbs. (27.7 kg)
Cables: 20 lbs. (9.1 kg)
Total Unit Weight: 220V – 309 lbs. (140.2 Kg)

Phenix Technologies 6CP200/100-10 Specifications

General

Brand	Phenix Technologies
Model	6CP200/100-10
Category	Test Equipment
Language	English