Phenix Technologies 6CP50/10-3

Need help?

Do you have a question about the Phenix Technologies 6CP50/10-3 and is the answer not in the manual?

Summary

General Safety Precautions

Technical Specifications

Input and Output Specifications

Details input voltage, frequency, power, current, and output ratings.

Duty Cycle and Performance Parameters

Controls and Indicators

Main Power and Indicator Lamp

High Voltage Activation Controls

Explains the HV On switch and Ready lamp functionality.

Voltage, Current, and Reset Controls

Details voltage control, overcurrent trip/reset, and currentmeter.

Input;Output and Interlock Ports

Electrical Set-Up

Grounding and Interlock Connections

High Voltage Connection Procedure

Ground-Guard-Return Connections

Operating Instructions

Pre-Operation Checks and Setup

Ensures correct setup, zero start, and interlock conditions.

Applying High Voltage

Steps for turning on HV, adjusting voltage/current, and recording data.

Overcurrent Failure Handling

Procedures for responding to and resetting overcurrent trips.

Calibration Procedures

Output Voltmeter Calibration

Output Currentmeter Calibration

Overcurrent Circuit Calibration

Troubleshooting

General Troubleshooting Steps

Basic checks for power, lamps, fuses, and connections.

High Voltage and Control Issues

Metering and Overcurrent Problems

Mechanical Maintenance