PHICOMM i600 - Device

14
Tethering &portable hotspot
USB tethering / portable WLAN hotspot / Configure WLAN
hotspot / Bluetooth tethering / help
WLAN direct
Click to activate / deactivate a p2p (peer-to-peer) link
WLAN direct settings
Set up peer-to-peer connectivity
Mobile networks
 Data enabled: Enable data access offer Mobile network
 Data roaming: Connect to data services when roaming
 Use only 2G networks: this should be set if you do not
want to use the internet, it will help to save battery
 Network operators: select a network operator
 Network settings: Manage Network settings of each
subscriptions
- Access Point Name: Tap the required access point to
make specific parameter setting.
- Network connectivity: GSM or WCDMA is optional
- Network operators: select a network operator
NOTICE: This device is dual SIM cards dual standby and
supports two SIM cards simultaneously. Tap slot 1 or slot 2 to
make separate settings of every single SIM card.
DEVICE
Dual-card settings: you can make separated settings of
every single SIM card as follows
 SIM Card configuration：setting up the SIM card name,
network and calling
- SIM card：setting up the SIM
card name, enable or disable the
SIM card separately
- Mobile network settings：setting
up the network mode, access
point and operator of each SIM
card separately
- Call settin ： setting up fixed
dialing, IP call setting, quick